(02) 9979 5735

WHISTLE for BASE CAMP and SCOUT Kettles ONLY

Be the first to review this product

Availability: In stock

$11.00
OR

Quick Overview

WHISTLE for the Kelly Kettle 'BASE CAMP' and 'SCOUT' Kettles ONLY.

Metal whistle inserted into soft green rubber. GREEN for GO!

NB: Chain is NOT Included
and Whistle does NOT FIT the smaller 'TREKKER' Kettle

WHISTLE for BASE CAMP and SCOUT Kettles ONLY

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

Details

Whistle for Kelly Kettle 'BASE CAMP' and 'SCOUT' models. Metal whistle inserted into soft green rubber. Whistle, Clip and Split-ring provided. CHAIN NOT INCLUDED. This will retro-fit older models of these size kettles also. PLEASE NOTE: Whistle does NOT FIT the smaller 'TREKKER' Kettle Metal whistle inserted into soft green rubber. GREEN for GO! Instructions for use: 1. Slightly underfill the kettle with water. Fill it to perhaps 15mm (over half an inch) below the water spout. 2. Place the GREEN Kelly Kettle whistle LOOSELY and GENTLY into the water spout of your kettle. Always ensure that the arrow is pointed down toward the ground as this will direct any escaping steam safely downward. 3. DO NOT press the whistle into the spout as we want to be able to easily remove it when the kettle has boiled. 4. Boil your kettle as normal (please refer to the instruction leaflet that is provided with each kettle). 5. When boiled, remove the kettle from the firebase and place on level ground. Allow the water to settle for approximately 1 minute. Hold the handle of the kettle with one hand. Then with your other hand, place your index finger in the split ring and your thumb on the opposite side of the whistle. Gently lift the whistle away. Never use sudden, forceful or excessive force or sharp twist to remove the whistle. 6. Follow the instruction leaflet (supplied with your kettle) on the correct way to lift and pour the kettle. DO NOT MISTAKE WITH OUR ORANGE/RED STOPPER WHICH MUST ALWAYS BE REMOVED BEFORE BOILING

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.